"Gus The Bus"

  

  

J&S Valve is committed to providing the highest quality valves for longer service life and is recognized around the world for manufacturing the most robust valves on the market. Providing 100% testing, rather than random testing, sets J&S apart. All valves are tested in accordance to the American Water Works Standards. J&S Valve strives to provide superior customer service and to provide quality products at competitive prices. J&S is committed to complete customer satisfaction. Currently, J&S Valve offers AWWA C509, & C515 Resilient Seated Gate Valves through 108”, AWWA C500 Metal Seated Solid Wedge Gate Valves through 108”, AWWA C508 Metal and Resilient Seated Swing Check Valves through 48”, HedFlex Duckbill Rubber Check Valves, Dry/Wet Barrel Fire Hydrant Protector Series 5000, Commercial Wafer/Lug Butterfly Valves, and Metal Seated Control Valves through 108”.

 

J&S Gate Valves –Resilient Seated & Solid Wedge Metal Seated

 

J&S Gate Valves offer Ductile Iron Body, Bonnet, Wedge and Gland, whereas the AWWA specifications allow for Cast Iron. Cast Iron (Class B) has approximately 1% elongation versus Ductile Iron, which has approximately 9% elongation. The tensile strength of Cast Iron is 31,000 psi.

 

The tensile strength of Ductile Iron is 65,000 psi. Since Cast Iron has less elongation than Ductile Iron, it can rupture under less pressure than Ductile Iron. When pressure surges occur in a system, Ductile Iron valves can withstand higher pressure surges than Cast Iron valves. The Ductile Iron wedge is totally encapsulated with EPDM Rubber versus Buna-N. EPDM is more resistant to Chlorine and Chloramines, which are used in high concentration in Reuse Water Systems. J&S standardizes on a Stainless Steel stem with a tensile strength of 64,000 psi, which is twice as strong as a Bronze stem.

 

This selection of materials, also including Stainless Steel fasteners, NSF/ANSI approved Fusion Bonded Epoxy Coating on the interior and exterior of the valves and on the hand wheel or 2” operating nuts, assures the end-user a robust, long lasting, maintenance-free valve. J&S Valve has the cost complete line of AWWA Gate Valves in America.


FL X FL NRS Resilient Seated Sizes 2 - 16 Series 6800.5

C515 RESILIENT SEATED:

Sizes 2”- 16”

J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. 

C515 RESILIENT SEATED:

Sizes 2”- 16”

J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating.

MJ X MJ NRS Resilient Seated Sizes 2 - 16 Series 6900.5

C515 RESILIENT SEATED:

Sizes 2"- 16"

J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Valve Damage.

MJXMJ, NRS Series 3900 Sizes 3"-12" series 3900

C500 METAL SEATED:

Sizes 3 ” -12”

AWWA Metal Seated Gate Valve, NRS,MJXMJ, AWWA C500 Gate Valve is the most robust gate valve on the market. The AWWA C500 Standard establish the minimum required to construct metal seated gate valves. J&S Metal Seated Gate Valves design and material exceed AWWA C500 standards for long life.

FLXFL, NRS Metal Seated Sizes:2-48 Series 3800

C500 METAL SEATED:

Sizes 2” - 48”

AWWA Metal Seated Gate Valve, NRS, Flange AWWA C500 Gate Valve is the most robust gate valve on the market. The AWWA C500 Standard establish the minimum required to construct metal seated gate valves. J&S Metal Seated Gate Valves design and material exceed AWWA C500 standards for long life. 

FLXFL, OS&Y Metal Seated Sizes:2-66 Series 3700

C500 METAL SEATED:

Sizes 2” - 66”

AWWA Metal Seated Gate Valve, OS&Y, Flange AWWA C500 Gate Valve is the most robust gate valve on the market. The AWWA C500 Standard establish the minimum required to construct metal seated gate valves. J&S Metal Seated Gate Valves design and material exceed AWWA C500 standards for long life.

Threaded End Resilient Seated Sizes: 3/4 - 4 Series 6300

C509 RESILIENT SEATED:

Sizes 2", 3", 4"

J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Damaging Valves.

FL X PO, NRS Resilient Seated Sizes: 4 - 12 Series 6400

C509 RESILIENT SEATED:

Sizes 4” - 12”

The most robust gate valve on the market. Flanges conform to ANIS B16.1, Class 150, Push On end connections for use with Ductile Iron Pipe and C900 PVC Pipe. J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Damaging Valves.

PO X PO, NRS Resilient Seated Sizes: 4 - 12 Series 6500

C509 RESILIENT SEATED:

Sizes 4” - 12”

The most robust gate valve on the market. Push On end connections for use with Ductile Iron and C900 PVC Pipe. J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Damaging Valves.

FL X MJ, NRS Resilient Seated Sizes: 2 - 48 Series 6600

C509 RESILIENT SEATED:

Sizes 2” - 48”

J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Damage Valves.

FL X FL, OS&Y Resilient Seated Sizes: 2 - 54 Series 6700

C509 RESILIENT SEATED:

Sizes 2” - 54”

J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Damaging Valves. 

FL X FL, NRS Resilient Seated Sizes: 2 - 96 Series 6800

C509 RESILIENT SEATED:

Sizes 2”- 108”

J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Damaging.

MJ X MJ NRS Resilient Seated Sizes 2 - 96 Series 6900

C509 RESILIENT SEATED:

Sizes 2” - 48”

J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Damaging Valves. 

Wafer Style Commercial Butterfly Valve Sizes: 2-24 Series 2300

Wafer Style:

Sizes 2” - 24”

General Purpose Commercial Wafer Body Style Butterfly Valves fit either ANSI Class 125 or Class 250 Flanges. Valve Body shall be cast Grey Iron ASTM 126 Grade B. Valve stems are to be constructed of 304 Stainless Steel. The disc material is 316 Stainless Steel. The seat material is EPDM. The stem seals O-rings are made of EPDM. Valves 2” - 8” are lever operated, and valves 10” and larger can be gear operated, unless automatic operation is preferred. Wafer Style Butterfly Valve are suitable for air service for temperature up to 250°F. Wafer Body Butterfly Series 2300 is provided by J&S Valve - Huffman, Texas.

Wafer Style Commercial Butterfly Valve Sizes: 2-24 Series 2500

Lug Style:

Lug Style Commercial Butterfly Valve Series 2300

Sizes 2” - 24”

General Purpose Commercial Butterfly Valves Lug Body Style for dead end service can be bolted to ANSI Class 125 or Class 250 Flanges. Valve Bodies are Cast Grey Iron ASTM 126 Grade B. Valve stems are 304 Stainless Steel . The disc material is 316 Stainless Steel. The seat material is EPDM. The stem seals are rubber O-rings made of EPDM. Valves 2” - 8” are lever operated, and valves 10” and larger are gear operated, unless automatic operation is specified. Valve are suitable for air service for temperature up to 250°F. Lug Body Butterfly Series 2500 are manufactured by J&S Valve - Huffman, Texas.

Dry Barrel Fire Hydrant: Sizes: 3'-6' Series 5000 AWWA C502

Dry Barrel Fire Hydrants:

Sizes 3'0”-6'0”

J&S Valve offers the “Protector 5000” dry barrel fire hydrant manufactured to AWWA C502 Standard. The Protector 5000 is UL Listed/FM approved at 250 psi rated working pressure. J&S stocks the Protector 5000 in bury depths ranging from 3’0” – 6’0”, with Mechanical Bases (shoes) manufactured to ANSI/AWWA C111/A21.11 Standard. Flanged Bases in accordance with Ansi B16.1, Class 125 are available upon request.

Wet Barrel Fire Hydrant: Sizes: 3'-6' Series 5000 AWWA C503

Wet Barrel Fire Hydrants:

Sizes 3'0”-6'0”

J&S Valve offers the “Protector 5000” wet barrel fire hydrant manufactured to AWWA C503 Standard. The Protector 5000 is UL Listed/FM approved at 250 psi rated working pressure. J&S stocks the Protector 5000 in bury depths ranging from 3’0” – 6’0”, with Mechanical Bases (shoes) manufactured to ANSI/AWWA C111/A21.11 Standard. Flanged Bases in accordance with Ansi B16.1, Class 125 are available upon request.

Metal Seated Swing Check Valve w. Lever & Weight Series 9000 Sizes: 2-24

Metal Seated Swing Check Valve:

Series 9000

Sizes 2" - 24"

The J&S Lever and Weight Swing Check Valve is in compliance with AWWA C508 and offers flanges that conform to ANSI B16.1 Class 125. The globe shape provides full flow with low pressure drop. This valve is equipped with an adjustable outside lever and weight. This valve is suitable for mounting in the horizontal or vertical position.

Resilient Seated Swing Check Valve w. Lever & Weight AWWA C508 Series 9100 Sizes:2-48

Lever & Weight Check Valve:

Series 9100

Sizes 2"-48"


The J&S Lever and Weight Swing Check Valve is in compliance with AWWA C508 and offers flanges that conform to ANSI B16.1 Class 125. The globe shape provides full flow with low pressure drop. This valve is equipped with an adjustable outside lever and weight. This valve is suitable for mounting in the horizontal or vertical position.

Lever & Spring Swing Check Valve AWWA C508 Series 9100 Sizes:2-48

Lever & Spring Check Valve:

Sizes 2”- 48”

The J&S Swing Check Valve with Lever and Spring is in compliance with AWWA C508 and offers flanges that conform to ANSI B16.1 Class 125. The globe shape provides full flow with low pressure drop. This valve is equipped with an adjustable outside lever and weight. This valve is suitable for mounting in the horizontal or vertical position.

Air Cushion Check Valve:

Sizes 2”- 48”

The J&S Air Cushion Swing Check Valve with Lever and Weight offers 100% Flow Area; Full Water Way; Unrestricted Flow; and allows Controlled Closure of Full Stroke with 100% by Air. The J&S Air Cushion Swing Check Valve with Lever and Weight offers a Mechanically Retained Drop Tight Seat with a Stainless Steel seat ring and hinge pins. This valve comes standard with a Ductile Iron Body, Cover, and Disc and is Fusion Bonded Epoxy Coated Inside and Out with an NSF-61approved coating. The J&S Valve Air Cushion Swing Check Valve with Lever and Weight is available with ANSI Class 125 or 250 flanges. The J&S Valve Air Cushion Swing Check Valve with Lever and Weight is in compliance with American Water Works Standard AWWA C508.

Air/Oil Swing Check Valve w. Lever &Weight AWWA C508 Series 9100AO Sizes:2-48

Air-Oil Cushion Check Valve:

Sizes 2”- 48”

The J&S Air/Oil Cushion Swing Check Valve with Lever and Weight offers 100% Flow Area; Full Water Way; Unrestricted Flow; and allows Controlled Closure of Full Stroke with 90% by Air and 10% by Oil. The J&S Air/Oil Cushion Swing Check Valve with Lever and Weight offers a Mechanically Retained Drop Tight Seat with a Stainless Steel seat ring and hinge pins. This valve comes standard with a Ductile Iron Body, Cover, and Disc and is Fusion Bonded Epoxy Coated Inside and Out with an NSF-61approved coating. The J&S Valve Air/Oil Cushion Swing Check Valve with Lever and Weight is available with ANSI Class 125 or 250 flanges. The J&S Valve Air/Oil Cushion Swing Check Valve with Lever and Weight is in compliance with American Water Works Standard AWWA C508.

Ball Check Valve:

Sizes:” 1-1/2”-14”

J&S Valve, Ball Check Valve - Fully rubber coated aluminum ball, functions under low pressure, blockage free, low frictional loss, for sewage prone to blockage, Fusion Bonded Epoxy Coated inside and outside, ANSI Class 125, Sizes 1-1/2" to 14"

Ball Check Valve Series 9400 Sizes: 1-1/2-14

Wafer Check Valve:

Sizes 2”- 24”

J&S Valve, Wafer Check Valve - Short face to face dimension allows for service in tight spaces, spring assisted for better closure. This valve has a resilient seat which allows for seating at low differential pressure. J&S Valve’s Wafer Swing Check Valve can be supplied with a Buna-N seat or an EPDM seat. The J&S Wafer Swing Check Valve is self-acting. The Valve is available with ANSI Class 125 flanges.

J&S Valve Thin Swing Check Valve - Stainless Steel Series 9300 Sizes: 2-24"

Stainless Steel Check Valve:

Sizes 2”- 24”

J&S Valve, Thin Wafer Check Valve. The short face to face dimension allows for service in tight or confined spaces. This valve is self-acting. The Resilient Seat allows for seating at low differential pressure. This valve is available with ANSI Class 125 Flanges.